Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$105.00 - $120.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. Three sealed cartridge bearings make the Flash III iSSi’s smoothest rolling, most durable, lightest clipless pedals with multiple spindle length options. - Spindle Type: Flip III: Triple Bearing - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included
$83.99 - $139.99
absoluteBLACK Oval Direct Mount 1x Chainrings for CINCH greatly improve traction and climbing abilities. They are designed for Race Face cranks that utilize the CINCH system. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for bikes with Boost spacing and fat bikes (when reversed)
$83.99 - $141.68
absoluteBLACK Oval Direct Mount 1x Chainrings for SRAM greatly improve traction and climbing abilities. They are designed for SRAM cranks that have a 3-bolt direct mount interface and removable spider. Direct mount chainrings provide significant weight savings over a standard spider and chainring combination. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 3mm offset is designed for 141/148 Boost spacing on standard DUB/GXP/Long Spindle BB30, as well as 157 Super Boost spacing on dedicated Super Boost DUB cranks - Designed for GXP, DUB, and long-spindle BB30 cranks
$55.00
Position versatility makes Zipp’s Service Course 80 bars an instant favorite. The drops are kept close and within reach, and because they’re angled outwards by 4 degrees, your wrists remain in a strong, natural position. This lets you get low and aero without compromising comfort or control. Zipp left the transition from the tops to the brake hoods flat so you can ride comfortably, even in a more upright position. Stiff for uncompromising strength, these aluminum bars are ready for anything.
$110.00
Zipp's answer—true to our fit-first philosophy for handlebar design—is an innovative new all-road bar: the Service Course SL 70 XPLR. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop-bar bicycle—from paved roads onto gravel, mud, dirt, and even singletrack. The Service Course SL 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Today's riders demand a few things out of their cockpit, whether they are doing a two-hour training ride from home or a 200-mile gravel adventure: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops, specifically focusing on two crucial metrics—outsweep and flare. Features - Bar drops provide a wider, balanced, and secure position with drops that are about 6cm wider than the hoods position for technical or intense riding. - The 70 XPLR also features an ergonomic top with an extended 100mm clamping area for computer mounts, aero-extensions, bags, and whatever else you may need for the long haul.
$118.00
This is Zipp's innovative all-road handlebar, the Service Course SL 70 XPLR. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle—from paved roads onto gravel, mud, dirt, and even single track. The Service Course SL 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Today's riders demand a few things out of their cockpit, whether they are doing a two hour training ride from home or a 200 mile gravel adventure: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops, specifically focusing on two crucial metrics: outsweep and flare. Outsweep is created by rotating the drop below the brake perch outward. Flare is created by rotating the entire drop above the brake perch outward. - Distinctive Zipp cosmetics - 70mm Reach and 115mm drop allow a comfortable hoods position and a shallow drops postion - 5° drop Flare and 11° drop outsweep creates a drops position 6cm wider than hoods - Ergonomic top with 3° backsweep - Lifetime warranty
$41.00
Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.
$60.00
Zipp developed an extensive line of aluminum aerobar extensions to provide the perfect fit for any rider, regardless of size or riding position. The Vuka Alumina Extensions offer three different bends to achieve your ideal fit. - Vuka Alumina Race feature 52mm of rise (175g). The Vuka Race bend places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics. - Vuka Alumina Evo are available with a 70mm (176g) or 110mm (180g) rise. Designed to deliver improved aerodynamics by placing hands closer together and nearer to the rider’s head to start airflow over the rider sooner.
$19.99
- Bar end plugs are vital for any bike. - The new Wolf Tooth Alloy Bar End Plugs feature a machined 6061-T6 aluminum end cap, a bolt, and an expandable plastic nut to comprise a lightweight, secure bar end plug option. - Available in eight colors that match existing anodized Wolf Tooth headsets, seatpost clamps, chainring bolts, and more - It is compatible with drop bars and MTB bars.
$29.99
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the RaceFace cranksets that have removable Cinch spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank
$54.95
Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. - Stainless Steel Bearings provide unparalleled corrosion resistance - Highly recommended if your headset will be exposed to wet conditions or sweat - Lifetime warranty
$39.95
Wolf Tooth Supple handlebar tape is extra thick, extra wide, extra soft, and extra tacky. Designed for the abuse of unforgiving trails. The 40mm wide tape can be tuned for additional thickness by wrapping with increased overlap. - Washable surface is resistant to wear and packing out - 5mm thick, 100% silicone is washable, resistant to wear and packing out - Self-fusing silicone finishing tape included for a clean finishing touch - Length: 152cm
$39.95
Wolf Tooth Supple handlebar tape is extra-thick, extra-wide, extra-soft, and extra-tacky. Designed for the abuse of unforgiving trails, the 40mm wide tape can be tuned for additional thickness by wrapping with increased overlap. - 5mm thick, 100% silicone is washable, resistant to wear and packing out - Self-fusing silicone finishing tape included for a clean finishing touch
$9.95
This stem cap is where your bike fashion sense and the weight weenie in you collide. This Ultralight and ultra-sleek stem cap integrates a 5mm, 10mm or 15mm headset spacer with your stem cap in finely machined piece. Why have extra steerer tube requiring spacers on top of your stem you ask? Well, many carbon steerers require that the steer tube extend above the stem. Also, riders may want the flexibility to move handlebar height up and down for different types of riding or for bike re-sale. - Design and manufactured in Minneapolis, MN USA - 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only - 6061-T6 aluminum - 5mm internal cylinder wall height - Black aluminum bolt included Total weight (cap + bolt): 5mm= 12g. Compare to a standard flat stem cap and steel bolt at 20 grams + spacers add even more.
$309.00
CAMO Chainring Bolt Kit are designed specifically for use with CAMO spiders and rings - Includes 5 Torx head M5 x 8mm bolts - ED coated steel is durable - Bolts include a blue Nylok patch for a secure installation - Torque bolts only to 4-5 Nm and use blue Loctite threadlock
$15.99
Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included
$15.99
Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included
$15.99
Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included
$15.99
Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included
$15.99
Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included
$15.99
Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included
$15.99
Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included
$15.99
Wolf Tooth CenterLock Rotor Lockrings for securing centerlock rotors to centerlock hubs. Machined from 7075-T6 aluminum at Wolf Tooth in Minnesota, USA. - Compatible with 12mm, 15mm and 20mm thru axles and QR - Machined 7075-T6 aluminum - Durable anodized finish - Torque to 40Nm - Not compatible with 6-bolt rotors and hubs - Washer included
$17.95
Add some color and style to your bike build with Precision Headset Stack spacers. Offered in multiple sizes, made proudly in Minneapolis, MN, and laser marked with the stack size on each end, find your perfect fit. - Designed and manufactured in Minneapolis, MN USA - Fits 1 1/8" steerers only - Made from 6061-T6 Aluminum
$69.95
ReMote Dropper Lever - Lever pivots on a 21mm ball bearing for smooth operation - Cable Kind Clamp does not damage secured cables and features captive hardware. - Includes barrel adjuster for on the fly changes - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash.
$69.95
ReMote Dropper Lever - Lever pivots on a 21mm ball bearing for smooth operation - Cable Kind Clamp does not damage secured cables and features captive hardware. - Includes barrel adjuster for on the fly changes - Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash.
$64.95
Wolf Tooth Premium headsets are machined out of aircraft grade aluminum and feature high-end bearings made by Enduro. They are engineered to use the largest possible ball size and are filled with high-pressure waterproof lubricant. A pair of dual-lip seals ride in micro-grooves to keep out water and debris. - Stainless Steel Bearings provide unparalleled corrosion resistance - Highly recommended if your headset will be exposed to wet conditions or sweat - Lifetime warranty
$47.25
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings
$93.82
Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 30mm spindle cranks in your frame. These bearings fit directly in frames with 41mm ID bottom bracket shells. Crankset spindle length must be longer than 104mm when used in a 86.5mm wide BB shell. - Sold individually (two needed per frame) - Bearings: Enduro Dual-Row ABEC-3 - Color: Silver - Bottom Bracket/Frame Interface: BB86, BB92, PF90, BB104/107, PF121, PF132 - Bottom Bracket Shell Width: 86.5mm – 132mm - Bottom Bracket Shell I.D.: 41mm - Flange OD: 42mm - Crank Spindle Diameter: 30mm - Over Bearing Width: 92mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Weight: 36g
$32.00
Replacement derailleur hanger for Specialized Diverge, CruX and Roubaix Carbon with quick release rear hub. This is not a complete QR conversion kit. It is only a replacement hanger. For a replacement hanger when using the 135x12 SCS thru-axle wheel, use Wheels Mfg DROPOUT-284. All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (1) M5x10 Socket head screw included
Page 1 of 247 Next page