Pedals

The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. Three sealed cartridge bearings make the Flash III iSSi’s smoothest rolling, most durable, lightest clipless pedals with multiple spindle length options. - Spindle Type: Flip III: Triple Bearing - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included

- Plastic nylon molded body - Chromoly spindle - 318g pair

- One-piece ABS resin body - Molded pins - 320g pair

- Forged AL6061 alloy pedal body - CNC-machined chromoly spindle - LSL sleeve bushing and sealed bearing - Adjustable tension (80~140kgf-cm) - Look Keo compatible cleats with 4.5° float - 86.5mm x 77.5mm - 325g pair - Size: 9/16" - Cleat Type: Look Keo - Style: Single Sided

KEO BLADE CARBON pedals feature a Chromoly+ axle and stainless steel bearings for extreme reliability. Beyond its weight, the surface contact area-to-weight ratio is the best in class. Light, aerodynamic and powerful, these pedals have all you need to take it to the next level. - Lightweight, but durable at 115g per pedal / 300g pair with cleats - The 67mm platform width and 700mm² platform area allow for maximum power transfer - The use of a carbon blade instead of a conventional metal spring means this pedal is lighter, more aerodynamic, and offers a faster cleat release - Easy clip in/out with composite blade tension from 8 (installed) to 12 (sold separately) - KEO cleats included - Carbon Body, Chromoly + Spindle, Patented Composite Leaf Spring Retention, Steel Bearings

The X-TRACK RACE shares its design with the CARBON and Ti models, offering a composite body and Chromoly+ axle for optimal stiffness while riding. The SPD mechanism functions reliably even in the most extreme conditions, shedding mud and debris which may get caught under your shoes. - Technology: X-Track - Cleats: X-Track Cleat included (Easy Cleat available separately) - Cleats standard: SPD compatible - Retention: 6 to 14 - Body: Composite - Spindle: Chromoly+ - Platform area: 515mm² - Platform width: 60mm - Stack height + cleats: 16.8mm (10.7 + 6.1mm) - Weight (pedal): 182g - Weight (pair + cleats): 415g - Float angle: 6° - Release angle: 13°

Rally RK100 is tested to the extreme, so you can ride there too. This single-sensing power meter delivers reliable power measurements and is easy to transfer between bikes, no matter what bike you're on or where you're riding. - Impeccably Designed Pedal—Rally power meters have undergone rigorous testing to increase reliability. Featuring a superior design with sensors housed inside, this pedal installs like any other pedal. And it's quick to transfer between bikes. - Reliable Readings—By reliably measuring your cadence and forces detected on the left pedal, Rally RK100 doubles the value to provide total power. Want more metrics? Upgrade later to the dual-sensing system (sold separately). - Cleat Compatibility—For a comfortable ride, this pedal is designed to fit your favorite LOOK KEO cleats. - Transferable Spindle—From road to gravel to cyclocross and much more, keep riding year-round with a transferable spindle that can be installed in the Rally RS/Rally RK road pedal body kits (each sold separately). - Battery Life—Make sure you're ready for those long rides and training sessions with up to 120 hours of battery life. Specs: - Battery type: LR44/SR44 (x4) or CR1/3N (x2) - Battery life: up to 120 hours - Maximum rider weight: 105kg - Accuracy: +/- 1% - Field calibration - Adjustable release tension - Measurement location: spindle - Communication: ANT+ and BLUETOOTH - Weight: 334g - Water resistance: IPX7 - Cleat type: KEO - Q-factor: 53mm (55mm with provided 2mm washer) - Stack height: 12.2mm In the Box: - Rally RK100 pedals - Cleat hardware - 55mm Q-factor washers - Documentation

Pedal built with quality materials. It features a strong, aluminum body, and a Cr-Mo axle on a slimline dual bearing system. - LSL bushing & sealed bearings - Tension gauge - Aluminum Body with CNC-Machined chromoly spindle - Includes E-RSL1 SPD-SL Style Cleats and mounting hardware

The DEFTRAP will revolutionize what you should expect from a nylon composite pedal with it's non-offset symmetrical platform to offer added stability behind the spindle, a true concave pedal profile so your feet sink into it, 10 total pins (8 replaceable cr-mo pins and 2 molded pins), our tried and true sealed bearings and DU bushing system, and top tier nylon and glass fiber composite material to create a pedal that feels unlike anything on the market. With a focus on ride quality, increased foot support, added stability, leading traction, ability to skim over rocks, and even coming in 10 colors-the DEFTRAP will challenge you to rebel against the conventional perception that a value pedal cannot rival the best pedals on the market!

Crank Brothers' most versatile pedal. The Candy excels at it all – cyclocross, XC, trail, all mountain. 4-sided entry enables superior mud-shedding capability, and customizable float and release angles create a dialed-in feel. - Spindle material: Forged scm 435 chromoly steel - Body material: One piece composite - Wing material: Stamped steel - Spring material: 300 series stainless steel - Release angle: 15° / 20° - Q-factor: 52mm - Inner bearing type: Igus LL-glide bearing - Outer bearing type: Enduro cartridge bearing - Cleat: Premium brass cleats with shims included - Weight: 294g per pair - Warranty: 5 years

Crank Brothers' Eggbeaters are 4-sided, which makes them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and these pedals feature 6-degrees of knee-friendly float. The Eggbeater 1s feature chromoly axles, stainless-steel springs, and steel bodies.

Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design sheds mud and debris quickly, and these pedals sport 6-degrees of knee-friendly float. The Eggbeater 2s feature forged chromoly axles, stainless-steel springs, and cast steel bodies. Plus, the internals are water-tight for excellent durability and consistently smooth pedaling.

e*thirteen's Base pedal features a durable composite pedal body and 22 traction pins. - Durable composite pedal body - 22 traction pins - 9/16"

The Baldwin offers the best of both worlds, bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. -  Weight: 332g CrMo -  Body: 60661 CNC AL -  Spindle: Cromoly -  Bearings: 3 Cartridge  -  Springs: SWP  -  Cleat: XPEDO XPT (6° Float)

The CXR is the ultimate performance cyclocross pedal for riders looking for lightweight, durability, and strength. The Posi-Lock retention system allows superior adjustability and easy rapid engagement action. Specially designed larger front retention claw maximizes positive entry in wet and muddy conditions. Cromoly spindles are paired with three precision cartridge bearings for minimal maintenance. - Weight: 295g  - Body: 6061 Forged Aluminum - Spindle: Cromoly  - Bearings: 3 Cartridge  - Springs: SWP  - Cleat: XPEDO XPT (6° Float) 

Xpedo's designers went back to the drawing board for the GFX to create a fresh new design to meet the demands of the evolving downhill racing styles. The latitude entry system allows rapid engagement in any condition, positioning the front claw upwards for intuitive, seamless contact with the pedal. The Posi-Fit retention system is fully adjustable for fine-tuning the entry and release. The low-profile 6061 CNC body with adjustable height pins provide traction and support with any style of shoes. Tapered cromoly spindles roll on three precision cartridge bearings for easy maintenance. Wider Q-factor allows ample clearance between shoe and crankarm. - Weight: 468g CrMo - Body: 60661 CNC AL - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Pins: 16 adjustable height grub pins per pair - Cleat: XPEDO XPT (6° Float)

Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency. - Weight: 260g - Body: Magnesium - Spindle: CroMo - Bearings: 2 Cartridge - Bushings: 1 DU - Pins: 28 Straight Pins per pair - Size: 106x100x11 (mm)

Wolf Tooth Ripsaw Aluminum Pedals feature a slim, lightweight design with a slight convex profile. The large, asymmetric machined aluminum platform provides strong foot support for all-mountain riding, while the thin convex profile is just 7mm thick at the leading edge. Inside the pedal are three fully sealed cartridge bearings, a stainless steel axle, a igus bushing, and a custom radial seal to protect internal components against trail debris. Slim Convex Profile Ripsaw pedals are 12.5mm thick in the center and just 7mm thick in the front and rear edges. This profile is supportive and comfortable for all riders, while performing exceptionally well for riders who prefer pedaling with a mid-foot position or for shoes that do not have much structure or support. Extra Grip Each side of the pedal has 12 stainless steel rear-loading 4.5mm pins for loads of traction. An additional six 4.5mm pins ship with the pedal. Shorter 3mm pins are available as replacement parts to customize the convexity of the pedal; by installing shorter pins on the edges, the convex profile is emphasized. Formed with Purpose The slight convex profile of the pedal body is tallest at the pedal spindle. The shape then tapers toward each edge from there. This profile aligns perfectly with the arch of your foot and provides a strong platform for power transfer. Reliable Performance Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Precision Machining Each Ripsaw Aluminum Pedal body begins as a billet of raw aluminum. After 37 minutes in our CNC mills, the result is a beautifully crafted pedal body that is ready for anodizing and assembly. If you’re a nerd for machining, you’ll appreciate the intricate gradients and machine paths.

Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. They are engineered to lock in your foot with a shape that matches your shoe, rear-loading pins for grip, and a dual-concave profile to further cradle your feet. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform shaped to match the footprint of your shoe. Large is 112mm x 106mm, small is 105mm x 99mm. Dual-Concave Profile: - Waveform pedals are 14mm thick on the perimeter and just 12.5mm thick in the center. This profile cradles your foot, front to back and side to side. Extra Grip: - Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. An additional six pins ship with each set of pedals and they are available as replacement parts. Shaped with Purpose: - The shape of Waveform Aluminum Pedals matches the footprint of your shoe Reliable Performance: - Three low-friction, fully sealed cartridge bearings and one igus bushing with a custom radial seal protect internal components against trail debris for riding in all conditions. Tapered Edges: - Large, tapered leading edge to deflect pedal strikes on rocky, rooty terrain Two sizes: - Large: 112mm x 106mm - 384g - Small: 105mm x 99mm - 373g Each size is proportionally scaled to match the silhouette of your shoe based on foot size or pedal size preference.

Wellgo LU-A52 BMX Platform Pedals provide stability and traction where it's needed. - Removable traction pins - Sealed bearings

Wellgo B-Series BMX/Mountain Platform Pedals. Molded pins

Wellgo B-Series BMX/Mountain Platform Pedals.

Aluminum body with plastic cage overmolded.

Wellgo LU-895 DU Caged Mountain Pedals feature a 1-Piece molded, cage-style body with DU Polymer bearing/bushings. Accepts toe clips/straps

An affordable pedal option for city cruiser bikes. Features a rubberized cage.

M111 Pedals Pedal Body Material: Aluminum Color: Black Pedal Type: Toe Clip Compatible Pedal Spindle: 9/16" Spindle Material: Chromoly Defined Color: Black Weight: 304

Pedal Body Material: Aluminum Color: Black Pedal Type: Platform Pedal Spindle: 9/16" Spindle Material: Chromoly Defined Color: Black Weight: 390

Wellgo WPD-823 Clipless Mountain Pedals. - Includes 98A cleats, Shimano SM-51 compatible - Dual-spring release/entry tension adjustment - Four degrees of Rotation - 9/16"

Wellgo WPD-95B Clipless Mountain Pedals. - Includes 98A cleats, Shimano SM-SH51 compatible - Four degrees of Rotation

VP's Flat Pedals combine wide platforms and a great grip for excellent stability with extruded and CNC-machined aluminum bodies for light weight and a rainbow of colors for high style. You also get tough chromoly axles and sealed bearings for durability. - 345 grams - 9/16" axles